MAF WALLPAPER JOURNAL

When to Remove or Replace Old Wallpaper

Not every old wallcovering needs replacing. If the surface is intact, clean and still suits the room, maintenance may be enough. Signs of water damage, lifting or widespread wear call for closer inspection.

Ask About Wallpaper
Interior wallpaper design inspiration from MAF Wallpaper

Use the ideas below as a starting point, then check samples and product instructions for your specific interior.

Watch for damage beyond surface marks

Look for recurring bubbles, loose seams, widespread fading, torn edges and discolouration. A damp smell or persistent mould-like staining should prompt investigation of the moisture source rather than cosmetic covering.

Consider the existing substrate

A wallcovering can hide poor plaster or previous water damage. Before planning a new finish, inspect the surface and resolve leaks or condensation issues. New adhesive cannot repair an underlying building problem.

Decide between a local repair and full removal

A small lifted edge may be repairable with a suitable adhesive after investigating the cause. Widespread seam failure, incompatible layers or repeated staining may make removal and preparation more reliable.

Prepare for a new finish

Remove loose material, deal with old adhesive, repair the wall and allow it to dry. Review material choice and indoor conditions before reinstalling wallpaper.

Frequently asked questions

Can new wallpaper go over old wallpaper?

It is sometimes physically possible but often not advisable. Surface adhesion and existing layers should be evaluated first.

Will fading improve with cleaning?

No. Sun-faded colours generally require replacement or redesign of the affected surface.

What if wallpaper bubbles after fitting?

Ask the installer to inspect the cause; moisture, preparation, adhesive or trapped air may be involved.

Explore more wallpaper advice

Read related guidance →
Call NowWhatsApp Us